Capacity | 10KVA | 15KVA | 20KVA | 25KVA | 30KVA | 40KVA | 50KVA |
8KW | 12KW | 16KW | 20KW | 25KW | 32KW | 40KW | |
Parameter | |||||||
GENERAL CHARACTERISTICS | THREE PHASE INPUT & THREE PHASE OUTPUT | ||||||
Technology | On-line double conversion | ||||||
Waveform | Pure sine wave | ||||||
Architecture | Stand Alone | ||||||
INPUT CHARACTERISTICS | |||||||
Input Voltage | Range: 280 – 470V at 50% load & 300V – 460V at full load | ||||||
Input Frequency | 50 Hz | ||||||
Input Voltage Range (Ph-Ph) | 318-459 V | ||||||
THD of input current | <5% at full load | ||||||
Compatibility with Generators | Yes | ||||||
Input power factor | >0.99 | ||||||
OUTPUT CHARACTERISTICS | |||||||
Output Voltage | 380, 400, 415V (3Ph+N) | ||||||
Efficiency | up to 96% | ||||||
Efficiency in ECO mode | up to 98,5% | ||||||
Output frequency (nominal) | 50 Hz | ||||||
Output frequency tolerance | ±0,1%Synch with Mains; ±0,01% Free Run | ||||||
Crest Factor | Up to 3:1 | ||||||
THD of output voltage | < 2% at full linear load | ||||||
Output power factor | 0.9 | ||||||
Output voltage tolerance | ± 1% | ||||||
Overload Capability | 10 min at 110%; 60 sec at 125% | ||||||
Bypass | Manual (Optional) | ||||||
BATTERIES | |||||||
Battery type | VRLA – Maintenance free | ||||||
Internal batteries | No | ||||||
External Batteries | Yes | ||||||
DC Voltage | 240 VDC to 360 VDC | ||||||
Charger | Built-in solid state three stage recharge (constant current, constant voltage with float charge) and with temperature compensation | ||||||
GENERAL | |||||||
Operating Temperature | 0 to 45 deg. C | ||||||
Noise Level | <55 dB at 1 meter | ||||||
Display & Indication | LCD display | ||||||
Status LED | Normal mode / Load on battery / System fault | ||||||
Audible Alarm | Mains failure alarm, Low battery alarm, UPS warning, Overload, Fault. |
Automated page speed optimizations for fast site performance